Best Air Compressor Under $1000

By Delphine •  Updated: 05/27/22 •  10 min read
Advertisements

Are you on a budget and looking for the best air compressor under $1000 to purchase?  You’re in the right place. Keep reading for the reviews of the best air compressors under $1000.

Through the use of electricity, diesel or gas, air compressors convert electric power into pressurized air. 

Air compressors from different companies vary in size, performance and features. If you’re looking for a good air compressor under $1000 for either commercial or home use, the following review will be of great help.

 

 

Read: Best Air Compressor For Impact Wrench

 

Reviews Of The Best Air Compressor Under $1000 2022

 

 

HP DAVV High Pressure Air Compressor

This is a high pressure Air compressor which is very suitable for filling scuba tanks and paintball tanks. It is equipped with four high pressure cylinders delivering  a maximum pressure of 4500 PSI and a maximum flow rate of 3.5 CFM. It runs on a Honda GX gasoline engine with 5.5 horsepower. 

It is equipped with an intake filter, pump, belt, starter, frame, isolator, safety valve, oil separator and filter, pressure gauge, pressure switch, and an air cooler.

The HPDAVV features a display unit which shows you the pressure level. It also has buttons which make it easier to adjust settings. The unit also has indicators which show PSI, MPA, KG among others. 

It has buttons which allow you to turn the unit on/off and other buttons which allow you to set limits for the pressure so that you don’t go too high or too low when operating it. There’s also a button for cooling the unit and a screen which shows the temperature of the water.

 

Pros
  • User friendly
  • Cooling system
  • Easy to fill
  • Powerful engine
  • Good airflow
  • Good pressure level
Cons
  • Requires a lot of maintenance

 

 

Northstar Portable Electric Air Compressor

This heavy-duty air compressor has a 1.6 HP induction motor and a 15 Amp output for optimal performance and efficiency. It has an ASME-certified 30-gallon vertical tank.

It also boasts a long-lasting cast iron V-twin pump that dissipates heat well and prevents heat transmission between cylinders.

It includes pneumatic wheels that are 10 inches in diameter for convenient mobility. Its oil-lubricated belt drive pump operates silently and has long service life.

The dual voltage motor is wired for regular 120V outlets, but it can also be changed to 240V. For optimal tool performance, it runs silently at 77dB with a maximum pressure of 155 PSI.

The crankcase is made of one piece of cast iron, the cylinder body is made of thermally stable cast iron, and the head is made of aluminium with a machined cast iron valve plate.

 

Pros
  • Heavy duty
  • Long lasting construction
  • High PSI rating
  • Simple to set up
  • Easy to use
  • Improved heat dissipation
Cons
  • Takes up floor space

 

 

 

 

California Air Tools 10020C Ultra Quiet Air Compressor

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is one of the quietest 2.0 HP air compressors on the market, operating at only 70 dB.

In comparison to other comparable air compressors with life cycles of 500 hours or less, the CAT-10020C Air Compressor has an Oil-Free Dual Piston pump with a life cycle before wear of 3000 hours or more.

The Oil-Free pump can be used in a wide range of temperatures (cold starts) and terrains (no oil in the pump).

The big 10 gallon steel air tank with wheel kit makes moving around the workplace, shop, or garage a breeze.

The Easy Start Valve enables a faster start-up with fewer starting amps. At startup, the Easy Start Valve lets a little amount of air out of the pump, creating a no-load condition that allows the motor to spin freely.

 

Pros
  • 10 gallon steel tank
  • Good CFM
  • 2 HP motor
  • Low maintenance
Cons
  • Quite heavy

 

 

 

 

DEWALT Air Compressor, 135-PSI Max

With 75 SCFM supplied @ 90 PSI pump, 1.0 gallon tank, and 135 maximum PSI, this air compressor allows for more nail firing and faster recovery.

Its oil-free pump lasts a long time and doesn’t require any maintenance. It’s light (24 lbs), thin (9.0″), and compact, making it easy to transport and store. It also incorporates a ball valve drain that enables for quick and complete tank draining.

The motor’s low 2.6 amp consumption makes it simple to start and prevents breaker tripping.

It comes with a single quick coupler for easy support of one nailer, a convenient cable wrap for easy storage, and a high-flow regulator for better performance.

The compressor’s critical components are protected by the roll cage and control panel. In addition, the motor’s low 2.6 amp consumption makes it simple to start and reduces breaker tripping.

 

Pros
  • Small size and lightweight
  • Operates quietly
  • Pocket friendly
  • Can be used for numerous jobs
Cons
  • It takes a long time for the tank to fill up and provide air

 

 

 

Metabo HPT Air Compressor

The most essential aspect of the Metabo HPT “Tank,” model EC914S, is that it has a 6 gallon air capacity and a maximum pressure rating of 200 PSI.

It can run two framing nailers, two siding nailers, two roofing nailers, three finish nailers, or five brad nailers all at the same time.

Although it is unclear why this comparison is being made, the 41-pound weight is reported to be 22 percent lighter than Metabo HPT’s standard EC99S twin-stack compressor model.

When compared to Metabo HPT’s basic pancake air compressor, the EC710S, the Tank provides 25% more PSI. It weighs 41 pounds and contains two quick-connect couplers, a metal handle, and a low-maintenance oil-free construction.

 

Pros
  • Adaptable
  • Pocket friendly
  • It is simple to run two framing nailers at the same time
  • High PSI
Cons
  • Quite noisy

 

 

Read: Best TIG Welder Under $500

 

How To Choose The Best  Air Compressor Under  $1,000

When purchasing an air compressor under $1,000 , there are several factors to consider. We cover the most important below. To enable you to make the best purchasing decision, you have to read them thoroughly as they help you analyze the products. 

Power Source

Air compressors basically come in two power source models- Gas and electricity powered.  

Gas powered air compressors rely on gasoline as their only source of power. Thus, once the tank is filled with gas, it will automatically power up the air compressor. 

This type of air compressor is suitable for working in secluded sites that have less electrical sources. With this type of air compressor,  you don’t have to look out for power sources in the work site. 

Another important thing is, they are usually used for outdoor purposes as the fuel combustion can release toxic fumes which can be very harmful if inhaled for a long time. 

However, with electrical air compressors,  they have to be plugged into electrical outlets.   Unlike the gas modules,  they have a continuous power supply to help them run properly. They will be more efficient if the site has usable outlets around. 

In terms of weight , they are light and this is mainly because they don’t have a tank holding fuel. This doesn’t restrict them from completing the tasks. 

They are quite affordable and convenient. You have to consider both options and choose which power type is most suitable for you. 

 

 Air Compressor Type

There are two types of air compressors. These are the two stage and single stage models. The handling of air these air compressors are basically the same.  The only difference is the process for connections pressing the air inside the cylinder. 

For example,  in a single stage air compressor,  air is compressed and then trapped in a single stroke. The air is stored inside the tank. However with the two stage air compressor, the air goes through another stroke before storing into a second piston. 

Two stage models are very powerful when compared to single-stage compressors.  This identified means a two-stage air compressor is the best choice for construction needs. It’s important to note that if your pneumatic tools have a small amount of power, then a single stage air compressor is very suitable.  

Compared to single stage air compressors, two stage air compressors can compress air to higher pressure (PSI). This means they can store more air without necessarily generating heat whilst increasing the compressor life and reducing wear.

 

Airflow Amount

The airflow amount simply refers to how quick the air compressor can fill up the tank and supply the air. It’s important to note that this is usually represented in CFM (cubic feet per minute). 

If you are going to use tools on a continuous basis with an average CFM rating,  you have to note that pneumatic tools have different levels of air flow rates to run them properly.  To get the proper CFM rating,  you should multiply the average number by 4 to get the right requirement of the suitable continuous CFM. 

You should also consider the maximum CFM rating of all tools that you have to use at a time. 

 

Horsepower

Although horsepower doesn’t directly impact the performance of the air compressor delivery, it is an important factor to really consider while purchasing a 30 gallon air compressor. 

Single stage air compressors range from 1 to 14 HP but for two stage air compressors, 1 to 18 HP is good enough. 

 

PSI

PSI is what enables you to decide which is better between a single stage or two stage air compressor.  You should always check what PSI is required for your requirements for the air tool’s specifications. 

It is advisable to go for a model with a minimum of 90 PSI rating.  However, it’s more  important if the highest rated air tool you use is a blow gun with 2.5 CFM at 90 PSI. In this case, you should go for a model with a minimum of 90 PSI rating. 

 

FREQUENTLY ASKED QUESTIONS 

 

Oil-less air compressors or oil-lubed ones. Which is better?

Most oil-less air compressors generate lower CFM and PSI ratings while the oil- lubed ones are more efficient and usually require very little maintenance. 

 

Is a 2 stage air compressor worth it?

Yes, this is because they produce higher air power, which mostly makes them a better option for larger-scale operations and continuous applications. 

It’s also important to note that they cost a lot more and this makes them better suited for factories and workshops than for domestic use. 

 

Read: Best Baitcasting Reel And Rod Combo

 

CONCLUSION 

Congratulations on making it this far.  We hope this article serves as a guide for you when it comes to purchasing the best air compressors under  $1,000. 

 

 

 

 

 

Delphine